X

Embedded System Design with ARM

By Prof. Indranil Sengupta, Prof. Kamalika Dutta   |   IIT Kharagpur
Learners enrolled: 6468
This course will discuss about the basic concepts of embedded system design, with particular emphasis on hands-on and demonstration sessions on system design using ARM microcontrollers. Keeping in view of the recent developments, this course will be based on state-of-the-art microcontroller boards and programming environments. This course will also help the participants to understand the developmental aspects of Internet of Things (IoT) based designs. Starting from the basics, the participants will be introduced to various interfacing issues with sensors and actuators. It is highly recommended that the participants procure some of the low cost microcontroller development boards and actually carry out the experiments that would be demonstrated

INTENDED AUDIENCE : Computer Science and Engineering / Electronics and Communication Engineering / Electrical Engineering
PREREQUISITES :Basic concepts in digital circuits and microprocessor
INDUSTRY SUPPORT : ARM, Intel, Texas Instruments, Qualcomm, Samsung, TCS, HP
Summary
Course Status : Completed
Course Type : Elective
Duration : 8 weeks
Category :
  • Computer Science and Engineering
Credit Points : 2
Level : Undergraduate
Start Date : 27 Jan 2020
End Date : 20 Mar 2020
Enrollment Ends : 03 Feb 2020
Exam Date : 29 Mar 2020 IST

Note: This exam date is subjected to change based on seat availability. You can check final exam date on your hall ticket.


Page Visits



Course layout

Week 1  :  Introduction to embedded systems and microcontrollers
Week 2  :  Instruction set architecture of ARM microcontroller, and assembly language programming 
Week 3  :  D/A and A/D converter, sensors, actuators and their interfacing
Week 4  :  Microcontroller development boards and embedded programming platforms
Week 5  :  Hands-on and demonstration I: Temperature sensing unit, Light sensing unit, Sound sensing unit
Week 6  :  Hands-on and demonstration II: Feedback control system, relay control unit, driving electrical appliances like motors, bulb, pump, etc.
Week 7  :  Hands-on and demonstration III: Object tracking using GPS and GSM
Week 8  :  Hands-on and demonstration IV: Introduction to Internet of Things, smart home concepts, motion sensing using accelerometer, control of appliances over SMS

Books and references

1.F. Vahid and T. Givargis, “Embedded System Design: A Unified Hardware/Software Introduction”, Wiley India Pvt. Ltd., 2002.

2. A.N. Sloss, D. Symes and C. Wright, “ARM System Developer’s Guide: Design and Optimizing System Software”, Morgan Kaufman Publishers, 2004.

3. W. Wolf, “Computers as Components: Principles of Embedded Computing System Design”, Morgan Kaufman Publishers, 2008.

Instructor bio

Prof. Indranil Sengupta

IIT Kharagpur
Indranil Sengupta has obtained his B.Tech., M.Tech. and Ph.D. degrees in Computer Science and Engineering from the University of Calcutta. He joined the Indian Institute of Technology, Kharagpur, as a faculty member in 1988, in the Department of Computer Science and Engineering, where he is presently a full Professor. He had been the former Heads of the Department of Computer Science and Engineering and also the School of Information Technology of the Institute. He has over 28 years of teaching and research experience. He has guided 22 PhD students, and has more than 200 publications to his credit in international journals and conferences. His research interests include cryptography and network security, VLSI design and testing, and mobile computing. 

He is a Senior Member of IEEE. He had been the General Chairs of Asian Test Symposium (ATS-2005), International Conference on Cryptology in India (INDOCRYPT-2008), International Symposium on VLSI Design and Test (VDAT-2012), International Symposium on Electronic System Design (ISED-2012), and the upcoming Conference on reversible Computation (RC-2017). He had delivered invited and tutorial talks in several conferences in the areas of VLSI design and testing, and network security.


Prof. Kamalika Dutta

Dr. Kamalika Datta completed her B.Sc. (Computer Science) from Ravenshaw College, Cuttack, India in the year 2003, Master of Computer Application from Biju Pattanaik University of Technology, Bhubaneswar, India in the year 2006, and then Master of Science degree from Indian Institute of Technology, Kharagpur, India in 2010. She completed her Ph.D. from Indian Institute of Engineering Science and Technology, Shibpur, India. She is presently working as an Assistant Professor in the Department of Computer Science and Engineering at National Institute of Technology (NIT), Meghalaya, India.

She had been a member of Indo-German bilateral research project funded by DST-DAAD during the period 2013-2015, and visited University of Bremen during October-November 2013 and again during September-October 2014. She attended the prestigious Heidelberg Laureate Forum held at Heidelberg, Germany in 2014. She is currently guiding three PhD students, handling three sponsored projects, and has published more than 42 papers in refereed journals and conferences. She organized a workshop on “Research Challenges in Reversible and Quantum Computing” at in 2015, and a GIAN course on “Logic Design of Quantum Circuits and memristor Based Systems” in 2016, both at NIT Meghalaya.

Her research interests include reversible and quantum computing, design of embedded systems, and information security. She is a Member of the IEEE.

Course certificate

• The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.
• The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).
• Date and Time of Exams: 29th March 2020, Morning session 9am to 12 noon; Afternoon Session 2pm to 5pm.
• Registration url: Announcements will be made when the registration form is open for registrations.
• The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.
• Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.

CRITERIA TO GET A CERTIFICATE:
• Average assignment score = 25% of average of best 6 assignments out of the total 8 assignments
given in the course.
• Exam score = 75% of the proctored certification exam score out of 100
• Final score = Average assignment score + Exam score

YOU WILL BE ELIGIBLE FOR A CERTIFICATE ONLY IF AVERAGE ASSIGNMENT SCORE >=10/25 AND EXAM SCORE >= 30/75.
• If one of the 2 criteria is not met, you will not get the certificate even if the Final score >= 40/100.
• Certificate will have your name, photograph and the score in the final exam with the breakup.It will have the logos of NPTEL and IIT Kharagpur. It will be e-verifiable at nptel.ac.in/noc.
• Only the e-certificate will be made available. Hard copies will not be dispatched.


MHRD logo Swayam logo

DOWNLOAD APP

Goto google play store

FOLLOW US