Swayam Central

Engineering Fracture Mechanics

By Prof. K. Ramesh   |   IIT Madras
The course covers the basic aspects of Engineering Fracture Mechanics. Spectacular failures that triggered the birth of fracture mechanics, Modes of loading, Classification as LEFM and EPFM, Crack growth and fracture mechanisms, Energy release rate, Resistance, Griffith Theory of fracture, Extension of Griffith Theory by Irwin and Orowan, R-Curve, Pop-in phenomena, Crack branching. Necessary and sufficient conditions for fracture, Stress and Displacement fields in the very near and near-tip fields, Westergaard, Williams and Generalised Westergaard solutions, Influence of the T-stress and higher order terms, Role of photoelasticity on the development of stress field equations in fracture mechanics, Equivalence between SIF and G, Various methods for evaluating Stress Intensity Factors, Modeling plastic zone at the crack-tip, Irwin and Dugdale models, Fracture toughness testing,Fedderson TMs residual strength diagram, Paris law, J-integral, HRR field, Mixed-mode fracture, Crack arrest methodologies.

INTENDED AUDIENCE : Students in Engineering Colleges and working professionals in similar areas
PRE-REQUISITES : Basic course on Strength of Materials. Course on Theory of Elasticity desirable
INDUSTRY SUPPORT : HAL, Honeywell, GE, GM, NAL, DMRL, DRDO, BEML, Mahindra&Mahindra, Tata Motors, L&T, VSSC, Defense and Atomic energy

Learners enrolled: 525


Course Status : Upcoming
Course Type : Elective
Duration : 12 weeks
Start Date : 20 Jul 2020
End Date : 09 Oct 2020
Exam Date : 17 Oct 2020
Enrollment Ends : 27 Jul 2020
Category :
  • Mechanical Engineering
  • Level : Undergraduate/Postgraduate
    This is an AICTE approved FDP course


    Week 1 : EFM Course outline and Spectacular Failures
    Week 2 : Introduction to LEFM and EPFM, Fatigue Crack Growth Model
    Week 3 : Crack Growth and Fracture Mechanisms, Griffith TMs Theory of Fracture
    Week 4 : Energy Release Rate
    Week 5 : Review of Theory of Elasticity 
    Week 6 : Westergaard Solution for Stress and Displacements for Mode I, Relationship between K and G
    Week 7 : Introduction to multi parameter stress field for Mode I, Mode II and Mixed Modes
    Week 8 : SIF for Various Geometries
    Week 9 : Modeling Plastic Deformation, Irwin TMs model, Dugdale Model
    Week 10 : Fracture Toughness Testing, Paris Law and Sigmoidal curve
    Week 11 : Crack Closure, Crack Growth Models, J-Integral
    Week 12 : Failure Assessment Diagram, Mixed Mode Fracture, Crack Arrest and Repair Methodologies 


    1. K. Ramesh, e-Book on Engineering Fracture Mechanics, IIT Madras, 2007. Visit Page
    2. Prashant Kumar, Elements of Fracture Mechanics, Tata McGraw Hill, New Delhi, India, 2009.
    3. K. R.Y. Simha, Fracture Mechanics for Modern Engineering Design, Universities Press (India) Limited,2001
    4. D. Broek, Elementary Engineering Fracture Mechanics, Kluwer Academic Publishers, Dordrecht, 1986.
    5. T.L. Anderson, Fracture Mechanics "Fundamentals and Applications, 3rd Edition, Taylor and Francis Group, 2005.


    Prof. K. Ramesh

    IIT Madras
    K. Ramesh is currently a Senior Professor at the Department of Applied Mechanics, IIT Madras; as its Chairman during (2005-2009) and formerly a Professor at the Department of Mechanical Engineering, IIT Kanpur. He received his undergraduate degree in Mechanical Engineering from the Regional Engineering College, Trichy (now NIT, Trichy), Postgraduate degree from the Indian Institute of Science, Bangalore and the Doctoral Degree from the Indian Institute of Technology Madras. 
    He has made significant contributions to the advancement of Digital Photoelasticity. This has resulted in a Monograph on Digital Photoelasticity - Advanced Techniques and Applications (2000), Springer, a chapter on Photoelasticity in the Springer Handbook of Experimental Solid Mechanics (2009) and a chapter on Digital Photoelasticity in the book on Digital Optical Measurement Techniques and Applications (2015), Artech House London. He has over 170 publications to date of which two have been reproduced in the Milestone Series of SPIE. His research has been funded by organizations such as ARDB, ISRO, DST, and NSF. He received the Zandman award for the year 2012, the only Indian to receive it since its inception in 1989, instituted by the Society for Experimental Mechanics, USA for his outstanding research contributions in applications utilizing photoelastic coatings. 
    For Details See: https://home.iitm.ac.in/kramesh


    The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.
    The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).
    Date and Time of Exams: 17 October 2020 Morning session 9am to 12 noon; Afternoon Session 2pm to 5pm.
    Registration url: Announcements will be made when the registration form is open for registrations.
    The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.
    Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.


    Average assignment score = 25% of average of best 8 assignments out of the total 12 assignments given in the course.
    Exam score = 75% of the proctored certification exam score out of 100

    Final score = Average assignment score + Exam score

    YOU WILL BE ELIGIBLE FOR A CERTIFICATE ONLY IF AVERAGE ASSIGNMENT SCORE >=10/25 AND EXAM SCORE >= 30/75. If one of the 2 criteria is not met, you will not get the certificate even if the Final score >= 40/100.

    Certificate will have your name, photograph and the score in the final exam with the breakup.It will have the logos of NPTEL and IIT Madras .It will be e-verifiable at nptel.ac.in/noc.

    Only the e-certificate will be made available. Hard copies will not be dispatched.

    Once again, thanks for your interest in our online courses and certification. Happy learning.

    - NPTEL team