BioMEMS And Microfluidics

By Prof. Shantanu Bhattacharya | IIT Kanpur

Learners enrolled: 1019

During the last several decades, micro-system research mainly addressed electromechanical systems and in recent years, the focus has shifted to Bio-Microelectromechanical Systems (BioMEMS). This shift is driven primarily by the potential applications of the micro-systems to chemistry, biology and medicine. In fact, a combination of BioMEMS and microsystems has made possible the realization of physical systems at scales and dimensions similar to biological entities such as bacterial and mammalian cells, viruses, spores, etc., and this has resulted in the development of a variety of diagnostic and therapeutic applications, intelligent biochips and sensors.

BioMEMS today finds many applications within the chemical, health-care, biotechnological and manufacturing industries and this has necessitated a considerable shift in the focus of engineering education. This course illustrates a post graduate level introductory course in BioMEMS and micro-systems.

INTENDED AUDIENCE

This course would be relevant for mechanical engineering manufacturing science/ fluidic streams graduate students and some senior undergraduate students. The interdisciplinary nature of the course would also be able to attract students from various disciplines like biosciences/ bioengineering, chemical engineering and environmental engineering. (Refer to participating faculty list). A considerable portion of the material will also be directly taught from review articles and publications. The highly interdisciplinary nature and research focus of this course may eventually be able attract some undergraduate students into graduate programs.

PREREQUISITES: Chemistry and basic fluid mechanics

INDUSTRY SUPPORT: Nil

Summary

Course Status :	Completed
Course Type :	Elective
Duration :	8 weeks
Category :	Mechanical Engineering
Credit Points :	2
Level :	Undergraduate/Postgraduate
Start Date :	14 Sep 2020
End Date :	06 Nov 2020
Enrollment Ends :	25 Sep 2020
Exam Date :	18 Dec 2020 IST

Note: This exam date is subjected to change based on seat availability. You can check final exam date on your hall ticket.

Page Visits

Course layout

Week 1: Introduction of BioMEMS and Microfluidics

Week 2: Sensing technologies

Week 3: Basic electrochemistry

Week 4: Fundamentals of microfluidics

Week 5: Applications of microfluidics

Week 6: Introduction to Cell biology, DNA & Proteins for diagnostics

Week 7: Introduction to Polymerase chain reaction (PCR)

Week 8: Microelectronic-fabrication processes

Books and references

1. Fundamentals of Microfabrication (Second Edition), Marc J. Madou, CRC press Taylor and Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL33487-2724, 2002.
2. BioMEMS Technologies and Applications, Edited by Wanjun Wang, Steven A. Soper, CRC press Taylor and Francis Group, 6000 Broken Sound Parkway
3. Biomolecular sensing, processing and analysis, Rashid Bashir, Steve T. Werely, Mauro Ferrari, Springer Science and Business Media LLC, 233 Spring Street, New York, NY10013, USA, 2006.
4. Fundamentals and applications of Microfluidics, Nam-Trung Nguyen, Steve T. Werely, Artech house Inc., 685 Canton Street, Norwood, MA02062, 2002.
5. The Science and Engineering of Microelectronic Fabrication (Second Edition), Stephen A. Cambell, Oxford University Press, 198, Madison Avenue, New York 10016, 2001.
6. Molecular Biology of the Cell (fourth edition), Bruce Alberts, Alexander Johnson, Julian Lewis, Martin Raff, Kate Roberts, Peter Walter, Garland Sand, Taylor and Francis group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL33487-2724, 2002.

Instructor bio

Prof. Shantanu Bhattacharya

IIT Kanpur

Prof. Shantanu Bhattacharya is currently as Associate Professor at the Department of Mechanical Engineering at the Indian Institute of technology Kanpur. Prior to joining the department he has been associated at a senior management level at Suzuki Motors and has over 6 years of experience in various production capacities and positions. Prof. Bhattacharya currently takes care of the 4-I laboratory at IIT Kanpur as its coordinator and has also been associated with the TA202 laboratory as coordinator between 2012-2015. Both these laboratories are very high end in terms of offering manufacturing training programs

Course certificate

• The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.

• The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).

• Date and Time of Exams: 18 December 2020, Morning session 9am to 12 noon; Afternoon Session 2pm to 5pm.

• Registration url: Announcements will be made when the registration form is open for registrations.

• The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.

• Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.

CRITERIA TO GET A CERTIFICATE:

• Average assignment score = 25% of average of best 6 assignments out of the total 8 assignments given in the course.

• Exam score = 75% of the proctored certification exam score out of 100

• Final score = Average assignment score + Exam score

YOU WILL BE ELIGIBLE FOR A CERTIFICATE ONLY IF AVERAGE ASSIGNMENT SCORE >=10/25 AND EXAM SCORE >= 30/75.

• If one of the 2 criteria is not met, you will not get the certificate even if the Final score >= 40/100.

• Certificate will have your name, photograph and the score in the final exam with the breakup.It will have the logos of NPTEL and IIT Kanpur. It will be e-verifiable at nptel.ac.in/noc

• Only the e-certificate will be made available. Hard copies will not be dispatched.