X

Biomass Conversion and Biorefinery

By Prof. Kaustubha Mohanty   |   IIT Guwahati
Learners enrolled: 1382
Since last two decades, researchers worldwide have drawn their attention to biomass based fuels as well as other value added products as biomass is not only renewable but also CO2 neutral. This course will provide an insight to the basics of biomass, various conversion technologies and the different types of products that can be obtained upon successful conversion. In first few lectures types biomass, their structure and composition has been discussed followed by details on various pre-treatment technologies currently adapted to produce cellulose. Later on conversion technologies basics along with reactor design for physical, chemical, thermal and microbial conversion techniques has been covered in detail. The next part of the course deals with various products such as biofuels, platform chemicals, polymers etc. Finally, integrated biorefinery concepts, types of biorefinery along with LCA and TEA has been added. The course will enable students to develop necessary skills to design appropriate biomass based fractionation technique as per the need.

INTENDED AUDIENCE
Final year BE/B.Tech., ME/M.Tech./MS/MSc and PhD students
PREREQUISITES : None
INDUSTRIES  SUPPORT     : All industries that process biomass to various products such as biofuels, platform chemicals and other value- added products
Summary
Course Status : Completed
Course Type : Elective
Duration : 12 weeks
Category :
  • Chemical Engineering
Credit Points : 3
Level : Undergraduate/Postgraduate
Start Date : 24 Jan 2022
End Date : 15 Apr 2022
Enrollment Ends : 07 Feb 2022
Exam Date : 23 Apr 2022 IST

Note: This exam date is subjected to change based on seat availability. You can check final exam date on your hall ticket.


Page Visits



Course layout

Week 1:Introduction: World energy scenario, consumption pattern, fossil fuel depletion and environmental issues
Week 2: Biomass: Availability and abundance, photosynthesis, composition and energy potential, virgin biomass production and selection, waste biomass (municipal, industrial, agricultural and forestry) availability, abundance and potential, biomass as energy resources: dedicated energy crops, annual crops (maize, sorghum sugar beet, hemp), perennial herbaceous crops (sugarcane, switchgrass, miscanthus), short rotation woody crops (poplar, willow), oil crops and their biorefinery potential, microalgae as feedstock for biofuels and biochemical, enhancing biomass properties for biofuels, challenges in conversion
Week 3: Biorefinery: Basic concept, types of biorefineries, biorefinery feedstocks and properties, economics
Week 4:Biomass Pretreatment: Barriers in lignocellulosic biomass conversion, pretreatment technologies such as acid, alkali, autohydrolysis, hybrid methods, role of pretreatment in the biorefinery concept
Week 5: Physical and Thermal Conversion Processes: Types, fundamentals, equipments and applications; thermal conversion products, commercial success stories
Week 6:Microbial Conversion Process: Types, fundamentals, equipments and applications, products, commercial success stories
Week 7: Biodiesel: Diesel from vegetable oils, microalgae and syngas; transesterification; FT process, catalysts; biodiesel purification, fuel properties
Week 8: Biooil and Biochar: Factors affecting biooil, biochar production, fuel properties, biooil upgradation
Week 9: Bioethanol and Biobutanol: Corn ethanol, lignocellulosic ethanol, microorganisms for fermentation, current industrial ethanol production technology, cellulases and their role in hydrolysis, concepts of SSF and CBP, advanced fermentation technologies, ABE fermentation pathway and kinetics, product recovery technologies
Week 10: Hydrogen, Methane and Methanol: Biohydrogen generation, metabolic basics, feedstocks, dark fermentation by strict anaerobes, facultative anaerobes, thermophilic microorganisms, integration of biohydrogen with fuel cell; fundamentals of biogas technology, fermenter designs, biogas purification, methanol production and utilization
Week 11: Organic Commodity Chemicals from Biomass: Biomass as feedstock for synthetic organic chemicals, lactic acid, polylactic acid, succinic acid, propionic acid, acetic acid, butyric acid, 1,3-propanediol, 2,3-butanedioil, PHA
Week 12: Integrated Biorefinery: Concept, corn/soybean/sugarcane biorefinery, lignocellulosic biorefinery, aquaculture and algal biorefinery, waste biorefinery, hybrid chemical and biological conversion processes, techno- economic evaluation, life-cycle assessment

Books and references

1. Donald L. Klass, Biomass for Renewable Energy, Fuels, and Chemicals, Academic Press, Elsevier, 2006.
2. Prabir Basu, Biomass Gasification, Pyrolysis and Torrefaction, Academic Press, Elsevier, 2013.
3. A.A. Vertes, N. Qureshi, H.P. Blaschek, H. Yukawa (Eds.), Biomass to Biofuels : Strategies for Global Industries, Wiley, 2010.
4. S. Yang, H.A. El-Enshasy, N. Thongchul (Eds.), Bioprocessing Technologies in Biorefinery for Sustainable Production of Fuels, Chemicals and Polymers, Wiley, 2013.
5. Shang-Tian Yang (Ed.), Bioprocessing for Value Added Products from Renewable Resources, Elsevier, 2007.

Instructor bio

Prof. Kaustubha Mohanty

IIT Guwahati
Prof. Kaustubha Mohanty has obtained his PhD degree in Chemical Engineering from Indian Institute Technology Kharagpur and is currently working as a Professor of Chemical Engineering at Indian Institute Technology Guwahati. He has more than 12 years of teaching and research experience at IIT Guwahati. His key research areas are biofuels, bioseparation, biological wastewater treatment, membrane technology, ionic liquids, and microalgae biorefinery and biomass pyrolysis. He has published more than 120 research papers in peer-reviewed journals and co-edited one book on Membrane Technology & Applications (Taylor & Francis, USA). He has an h-index of 27 and i10 index of 57 along with more than 2950 citations. He has supervised twelve PhD students and fifteen more are currently pursuing their PhD research under his supervision. He is involved in various sponsored and consultancy projects, four of which are currently running. He is an Editor of Journal of Chemistry; Associate Editor of The Journal of Institution of Engineers (India) Series: E; Associate Editor of Research Journal of Environmental Sciences; Review Editor of Frontiers in Bioenergy and Biofuel and Editorial board member of various journals. He is a Fellow of Royal Society of Chemistry, UK and fellow of Institution of Engineers, India. He is also Member of Society of Chemical Industry, London; Member of Canadian Society for Chemical Engineers and Life Member of Indian Institute of Chemical Engineers. He has served IITG in various capacities as Chairman of Cultural board and Head of Career Development Centre.

Course certificate

The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.
The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).
Date and Time of Exams: 23 April 2022 Morning session 9am to 12 noon; Afternoon Session 2pm to 5pm.
Registration url: Announcements will be made when the registration form is open for registrations.
The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.
Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.

CRITERIA TO GET A CERTIFICATE

Average assignment score = 25% of average of best 8 assignments out of the total 12 assignments given in the course.
Exam score = 75% of the proctored certification exam score out of 100

Final score = Average assignment score + Exam score

YOU WILL BE ELIGIBLE FOR A CERTIFICATE ONLY IF AVERAGE ASSIGNMENT SCORE >=10/25 AND EXAM SCORE >= 30/75. If one of the 2 criteria is not met, you will not get the certificate even if the Final score >= 40/100.

Certificate will have your name, photograph and the score in the final exam with the breakup.It will have the logos of NPTEL and IIT Guwahati .It will be e-verifiable at nptel.ac.in/noc.

Only the e-certificate will be made available. Hard copies will not be dispatched.

Once again, thanks for your interest in our online courses and certification. Happy learning.

- NPTEL team


MHRD logo Swayam logo

DOWNLOAD APP

Goto google play store

FOLLOW US